To 1.0.13.1 'link': Upgrade Medianav 9.1.3
The system should automatically detect a new version and ask, "Update, version 1.0.13.1?" Select or "Yes" .
Insert the USB stick. The system should automatically detect the update and ask if you want to upgrade from your current version to 1.0.13.1. Confirm: Select "Yes" or "Update."
Once the update begins, do not turn off the engine, turn off the MediaNav, or remove the USB drive until prompted. Step-by-Step Upgrade Process: MediaNav 9.1.3 to 1.0.13.1
To understand the upgrade from 9.1.3 to 1.0.13.1, one must first decode the nomenclature. Version 9.1.3 belongs to the original firmware tree based on a proprietary, often sluggish, operating system. These versions, culminating in the 9.x series, are known for frequent Bluetooth dropouts, a laggy GPS, and a peculiar inability to remember USB playback position. In contrast, version 1.0.13.1 is the final, most stable release of the firmware, based on a newer kernel. It is not a "downgrade" but a migration to a different software branch—like replacing the engine of a car rather than tuning the old one. The "1.0" represents a fresh start, offering reduced boot times, improved touchscreen calibration, and a more responsive interface.
Go to your car and turn on the . It is crucial that the power does not cut out during the update. Turn on the MediaNav system. upgrade medianav 9.1.3 to 1.0.13.1
Once upgraded, you cannot downgrade back to 9.1.3. The bootloader is updated permanently.
| Error Code | Message | Solution | | :--- | :--- | :--- | | | USB not recognized | Your USB drive is too fast or large. Reformat FAT32 or try a smaller USB 2.0 drive. | | ERR-05 | Missing files | You extracted the folder incorrectly. Ensure the RENEW folder is directly on the USB root. | | ERR-12 | Battery voltage low | Start the engine. The voltage dropped below 11.5V during the update. | | No pop-up | Drive not detected | Try a different USB port. On some Dacia Sandero models, only one of the two USB slots works for updates. |
After a moment, a prompt will appear on the screen stating: "An update is available. Current version: 9.1.3. New version: 1.0.13.1." Tap (or Upgrade ).
Format the USB stick to . Warning: This will erase all data on the USB stick. Ensure the root of the USB stick is completely empty. Phase 2: Installing the 1.0.13.1 Firmware The system should automatically detect a new version
WARNING: Confirm the update package exactly matches your unit model and region. Do NOT power off the car or remove the USB during the update. If unsure, get the official dealer or a professional to perform the upgrade.
: High-definition Android head units designed specifically to fit Dacia and Renault dashboards are widely available and often cost less than a factory replacement part.
Take your freshly formatted FAT32 USB drive to your vehicle. Start the engine and turn on the MediaNav unit. Go to > Options > Map Update > Options > Update .
The navigation logic is faster at calculating routes. The zooming in/out on maps becomes fluid rather than jerky. Crucially, this version supports updated map structures, meaning you can utilize newer road data that is incompatible with the older v9.x systems. Confirm: Select "Yes" or "Update
As the table shows, for owners of a MediaNav Evolution v1 system, software version . Version 1.0.13.1 runs on a completely new hardware platform, the MediaNav Evolution v2, which was released in mid-2018 .
First, let’s decode the math. Medianav 9.x.x is the old Linux-based interface. It is clunky, limited, and looks like a Wii menu from 2008. Medianav 1.x.x is the newer Android-based interface. It is smoother, supports modern codecs, and actually understands what "touch response" means.
If your goal is to get the features found in version 1.0.13.1 (like smartphone mirroring) onto your existing 9.1.3 device, you have two primary paths: 1. The Hardware Swap (The Replacement)