Leica Tc 407 Driver Jun 2026

Plug the cable into a USB port and connect it to the Leica TC 407.

Visit the official portal if you have a registered account.

On your TC 407 total station, navigate to the or ALLUX settings menu and set the parameters to match the industry standard: Baud Rate: 19200 (or 9600 for older systems) Data Bits: 8 Parity: None Stop Bits: 1 Data Flow / Handshaking: XON/XOFF or None PC Software Settings

The Leica TC 407 total station is a legendary workhorse in the surveying and construction industries. Known for its precision optics and rugged reliability, this instrument continues to deliver high-quality geospatial data years after its initial release. However, modern computers lack the legacy hardware ports originally used by this machine. Connecting your Leica TC 407 to a modern Windows 10 or Windows 11 operating system requires the correct drivers and communication interfaces.

Wrong cable type or flow control mismatch. Fix: LEICA TC 407 driver

If you use a standard RS232 cable plugged into a cheap USB adapter, the driver comes from the adapter manufacturer, not Leica.

The primary hurdle in connecting a Leica TC 407 to a modern computer lies in the hardware interface:

The Leica TC 407 driver is an essential component for users of the Leica TC 407 total station. By providing a reliable connection between the instrument and computer, the driver enables efficient data transfer, instrument control, and compatibility with various software applications. If you're experiencing issues or need to download the driver, refer to the Leica Geosystems website or authorized sources for assistance.

Connect the Lemo connector to the Leica TC 407 and . Verifying the Installation in Device Manager To ensure Windows recognizes the driver: Plug the cable into a USB port and

Программное обеспечение к тахеометрам Leica - Гео-Спектр

Once installed, verify that Windows recognizes the cable and assigns it a communication port.

Connect the cable to the instrument's port (underneath the screen) and the USB port on your PC. Open and select Data Exchange Manager .

Some users have reported a "Weak signal error 6" after firmware modifications. Known for its precision optics and rugged reliability,

To establish a connection, Windows must recognize the USB cable as a Virtual COM Port (VCP). Follow these steps to install the proper driver. Step 1: Download the Driver

The "driver" you need depends on the cable connecting your Leica TC 407 to your PC: GEV267 / GEV268 / GEV269: The current standard USB data cable for TCR/TC 407 series. GEV189 / GEV195 / GEV218: Older versions of the USB data download cable. Serial Cable + USB Adapter:

If you use a standard GEV189 cable or a third-party alternative, downloading the latest driver directly from FTDI Chip or Prolific Technology often yields better compatibility with Windows 10 and Windows 11 than generic Windows Update drivers. Step-by-Step Installation Guide

To successfully download coordinates or upload design points, match the communication parameters on both your PC software and the Leica TC407 instrument. Recommended Instrument Settings (TC407 Menu)