Disclaimer: This article is based on publicly available SDS information from 2023-2026. Always refer to the specific SDS document provided by your supplier for the most accurate and up-to-date information. Nalco 77225 SDS (GHS) | PDF | Toxicity - Scribd
Use only with adequate ventilation; effective exhaust systems are recommended to keep air concentrations below exposure standards.
: Contains Potassium Hydroxide (10-30%) and Tetrapotassium Pyrophosphate (10-30%). Emergency Measures
The SDS is structured into 16 mandatory sections. When assessing risk for a product like NALCO 77225, pay close attention to: nalco 77225 safety data sheet upd
: Colorless to light yellow liquid, with a density of 1.46 – 1.50 at 25°C. pH : Extremely alkaline, with a pH of approximately 13.5. Nalco 77225 SDS (GHS) | PDF | Toxicity - Scribd
The most recent guidance emphasises several handling requirements:
⚠️ This article is for informational purposes only. Always refer to the official, printed Safety Data Sheet provided by Nalco Water/Ecolab for the most accurate and site-specific safety instructions. Disclaimer: This article is based on publicly available
: Avoid contact with aluminum, copper, zinc, brass, and light alloys, as the product is corrosive to these materials. First Aid Measures
The most authoritative source is the manufacturer’s official portal. For Nalco Water products, you should go to the Ecolab or Nalco Water website and look for their "Safety Data Sheet" or "Product Documentation" search tool. You can typically search using the product name ("NALCO 77225") or its unique product code.
: Rinse immediately with water for at least 15 minutes, including under the eyelids. Seek medical attention if irritation persists. Inhalation pH : Extremely alkaline, with a pH of approximately 13
: Move to fresh air. If symptoms occur, seek medical advice.
if you cannot locate the new SDS. Scan the QR code on the chemical container to get the latest version.