Are you trying to set up or just change local settings ?
Tracks the total lifetime metrics of the compressor. This screen logs: Total running hours Total loaded hours Motor start cycles Load/unload cycles
Parameters and configuration
The system tracks maintenance history and provides a graphic service plan to notify operators before a component fails. 2. Installation and Initial Setup
Order replacement parts (filters, oil) and schedule a service window. Do not clear the code without performing the physical service. 2. Operational Warnings Atlas Copco Elektronikon Mk5 Manual
: A comprehensive 27-page Operation User Manual is available on , covering essential operation steps and maintenance.
Implements advanced control algorithms like Delayed Second Stop (DSS) to minimize unload running time.
If you are still running an obsolete Mk1, Mk2, Mk3, or Mk4 controller, the is a direct Plug&Play upgrade. Upgrading is often cheaper than repairing the old hardware and immediately unlocks cloud connectivity and energy optimization features.
Adjust the to the minimum acceptable pressure required by your production line. Are you trying to set up or just change local settings
Check terminal tightness; measure voltage phases; inspect element for smooth rotation.
Tracks component run-hours and alerts operators when preventative maintenance is due.
The serves as the definitive engineering and operational blueprint for navigating the Atlas Copco Elektronikon Mk5 compressor controller system. This comprehensive, industrial-grade industrial controller combines highly advanced programmable logic controller (PLC) microprocessor hardware with Atlas Copco’s proprietary monitoring algorithms to control, protect, and optimize compressed air installations.
The upper pressure threshold where the compressor stops generating air and runs in idle/unload mode to save power. Timer Settings 000-hour or major overhaul reset
Operation Sign (Green) : Indicates the compressor is actively running under automated regulation.
The Mk5 moves away from simple LED indicators to a graphical interface designed for ease of use.
: For a 1,000-hour or major overhaul reset, navigate to the service timer menu on the controller (often code 1560 ).