Adms 2i Ft 8800 Programming Software Jun 2026
Click on in the software menu, then select Send Data To Radio .
Set to T-SQL (Tone Squelch) or Tone (CTCSS) if required, and enter the frequency. Tag: Name the channel (e.g., "W1AW-RPT"). 3. Setting Up Hyper Memory
: Customization and automation of device settings through the software save time and reduce the potential for manual errors, leading to increased productivity.
Always follow the software prompts strictly regarding when to power the radio on and off during the cloning process. Truncated Names Adms 2i Ft 8800 Programming Software
Click on the PC to pull the factory default settings into your software grid. Step 3: Edit and Organize Your Channels
Ensure the mini-DIN plug is pushed firmly into the data jack on the back of the radio transceiver chassis, not the microphone port on the front panel.
Usually, this is a driver issue. Check Device Manager to ensure the USB cable is listed under COM ports without a yellow warning sign. Ensure the baud rate matches between the software and the radio. Click on in the software menu, then select
Plug the 6-pin mini-DIN end of the cable into the jack on the rear panel of the radio. Turn the radio on. Step 3: Perform an Initial Read
The software requires a specific cable to bridge your computer's USB port and the radio's data jack.
: The software allows for the creation and management of contacts and groups. This feature is particularly useful in professional settings where communication with specific teams or individuals is required. Truncated Names Click on the PC to pull
Programming a dual-band mobile transceiver manually can be a tedious and frustrating process. The Yaesu FT-8800R, with its extensive memory capacity and advanced features, is a prime candidate for software-based configuration. The ADMS-2I programming software is the official RT Systems utility designed specifically to streamline this process, allowing you to manage your radio's settings directly from your computer.
Follow the on-screen prompt instructions carefully (this usually involves turning the radio on while holding a specific key combination to enter "Clone" mode).
To download and install the Adms 2i Ft 8800 programming software, follow these steps:
The software is model-specific and works with the , FT-8800M , and FT-8800E . YAESU, ADMS-2I, Software Programming, ADMS2I
