: Connects directly to external power MOSFET gates or high-current loads.
The combination of high power, compact size, and DIY-friendly design makes the Abletec C1 suitable for a range of projects.
While specific revisions exist (such as the ALC0180 or ALC0300), the C1 baseline datasheet typically highlights the following parameters: Specification (Typical) 100W – 120W (RMS) Power Output (8Ω) ~50W (RMS) Efficiency > 85% at full power Frequency Response 20Hz – 20kHz (+/- 0.5dB) Input Type Balanced / Single-ended compatible THD+N < 0.05% at rated power Thermal Management No external heat sink required for standard operation Applications and Use Cases ableteccom c1 datasheet
: Manages internal networks, window motors, seating actuators, and logic gate translations.
| LED Code (Power/Status) | Meaning | Datasheet Reference Section | | :--- | :--- | :--- | | 1 blink, pause | Power OK, No application code | Section 6.1 (Firmware state) | | 2 blinks, pause | RS-485 bus contention (duplicate addresses) | Section 7.3 (Network config) | | 3 blinks, pause | Over-temperature (>85°C on PCB) | Section 4.2 (Thermal protection) | | Solid red | Fatal hardware error | Contact Ableteccom support | : Connects directly to external power MOSFET gates
(Note: Connector types may vary based on OEM revision)
: The high-side floating return (VS), high-side gate output (HO), and bootstrap power supply pin (VB) work in tandem to drive upper-rail N-channel MOSFET configurations up to high voltage offsets. | LED Code (Power/Status) | Meaning | Datasheet
Given the module is discontinued, finding a genuine Abletec C1 can be a challenge. Your best bet is to check with specialist electronic component distributors or explore community marketplaces and forums like the DIYAudio.com Swap Meet. A new, old stock unit may cost around .
The parent company (Anaview) acquired Abletec; their technical documentation covers the full module pinouts.
What (like the IRS20956) you are pairing it with.