Netapp Naj-1501 Manual -

To maintain optimal stability, security, and drive performance, keep the NAJ-1501 shelf firmware updated.

disk shelf. It is a 2U high-performance expansion chassis designed to provide additional storage capacity for NetApp FAS and AFF storage systems. Technical Specifications Form Factor : 2U rack-mountable chassis. Drive Bays

Pull the drive straight up out of the drawer slot. Wait 30 seconds for the controller to register the removal.

Flip the switches on both Power-Fan canisters of the NAJ-1501. Netapp Naj-1501 Manual

subgraph S1 [NAJ-1501 Shelf] D[SAS Port 1] E[SAS Port 3] F[IOM12 Module A] G[IOM12 Module B] end

Connect the SAS port with the Square icon on the storage controller to the Circle icon on the NAJ-1501 shelf.

Once the hardware is online, you must configure the clustered Data ONTAP (or 7-Mode) operating system. Connecting via Console Flip the switches on both Power-Fan canisters of

Use the NetApp Documentation Center to search for hardware installation guides and ONTAP command references.

Always remove the drive canisters and power supplies if lifting the chassis manually. Alternatively, use a mechanical server lift.

The NAJ-1501 features hot-swappable components to allow field replacement without scheduling system downtime. Replacing a Faulty Disk Drive use a mechanical server lift.

The NAJ-1501 features hot-swappable components to maximize uptime during hardware failures. Replacing a Faulty Disk Drive

Install the NetApp rail kit into your standard 19-inch server rack.

The NAJ-1501 typically utilizes mini-SAS (SFF-8088) or mini-SAS HD (SFF-8644) connectors. The IOMs feature designated (Square icon) and Out (Circle icon) ports. Standard Multipath Cabling Configuration