Press , HOUR , and MIN to set the time you want the device to turn OFF.
This write-up covers .
: The digital processor takes control, executing the ON/OFF schedules configured in Step 2. Advanced Tool: Random Security Mode bnd-50 se36 instructions
: If two schedules overlap (e.g., Program 1 instructs the outlet to turn off at 8:00 PM, but Program 2 instructs it to turn on at 7:30 PM), the "OFF" command takes precedence. Keep individual programs separated to avoid operational conflicts.
: Press and hold CLOCK while pressing WEEK (or DAY) until the correct day appears at the top. Press , HOUR , and MIN to set
: While continuing to hold CLOCK , tap the HOUR button until the correct hour displays. Pay close attention to the AM/PM indicators on the screen.
Press and hold the button and "MODE" (or Timer) button simultaneously to switch between a 12-hour (AM/PM) and 24-hour clock display. Daylight Saving Time (DST) Advanced Tool: Random Security Mode : If two
: If the screen is blank or you want to clear old settings, press the Reset ("R") button using a small pointed object like a paperclip. Setting the Current Time and Day
Full text of "Electronic power outlet timer BND-50 SG3 manual"
| Tool | Specification | |------|----------------| | Welder | MIG or TIG (steel, 0.030" wire) | | Angle grinder | With flap disc & cutoff wheel | | Drill | 12mm cobalt bit | | Punch set | Center punch | | Floor jack & jack stands | 3-ton min | | E36 rear subframe bushing tool | Or press | | Torque wrench | 20–150 Nm range | | Paint/primer | Rust-preventative (e.g., epoxy or zinc primer) | | Safety gear | Welding helmet, gloves, ear/eye protection |
The HBN BND-50/SE36 relies on a internal Ni-MH backup battery to store your schedule during power disruptions. If the LCD screen arrives blank, follow these steps to prime the device: