Congratulations! You have successfully set up and configured your CH-899 Chouchin radio controlled clock. With its atomic accuracy and user-friendly interface, you'll never have to worry about keeping accurate time again. If you have any questions or issues, refer to the instructions or contact the manufacturer's customer support team. Enjoy your clock and experience the benefits of precise timekeeping!
If your clock is showing the wrong time or failed to adjust for Daylight Saving Time (DST), you can force it to look for a signal right away. Press and hold the button for 3 seconds.
: Once powered, the hands will quickly advance and typically stop at 12:00 (sometimes 4:00 or 8:00). The clock is now in "reception mode" and will stay still while it searches for a radio signal. This can take anywhere from 3 to 15 minutes , though in some areas it may take up to 24 hours to find a stable signal. Manual Time Setting
Press and hold the button to move the hands continuously, or tap it repeatedly to advance the time minute-by-minute. Once you reach the correct time, release the button.
Congratulations on purchasing the CH-899 Chouchin Radio Controlled Clock! This user manual will guide you through the easy-to-use features and operations of your new clock. The CH-899 is a radio-controlled clock that automatically synchronizes with the atomic clock signal, ensuring accurate timekeeping. ch-899 chouchin radio controlled clock instructions
The hands will automatically move to the 12:00 position. This is the zeroing or "set-up" mode.
The hands are moving to their start position.
: Three recessed buttons on the rear pane labeled M.SET , REC , and RESET . Initial Setup and Automatic Synchronization
Setting up the CH-899 for the first time is largely an automated process: Congratulations
The longwave radio-frequency build of the CH-899 relies on regional atomic transmitters—such as the MSF signal in Anthorn, UK, or the DCF77 signal in Mainflingen, Germany. It uses an embedded antenna to listen for these signals and dynamically calibrate its hands. Automatic Initialization (First-Time Setup) MSF Radio Controlled Wall Clock - TLC Electrical Supplies
Move the clock to a window facing the direction of your regional transmitter. Leave it overnight. Radio signals travel much better through the atmosphere at night due to reduced solar interference. 2. The Hands Are Spinning Continuously
Elias picked up the manual again. His thumb brushed over the section labeled MANUAL TIME SET .
The location of your clock is critical for its ability to receive the time signal. Place it away from other electronics like computers, televisions, and appliances. If you have any questions or issues, refer
Understanding the physical movement layout ensures a seamless setup process: Specification CH-899 Chouchin Quartz Movement Power Source 1 × 1.5V AA / LR6 Alkaline Battery (not included) Accuracy
After stopping at the reference point, the clock enters "Signal Reception Mode."
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.