In the field, click Choose, navigate to your extracted Xiaomi firmware images folder, and select the Android_scatter.txt file (e.g., MT6765_Android_scatter.txt or MT6785_Android_scatter.txt ). The tool will populate the partition list below. Flashing the Firmware Step 4: Execute the Flash
Ultimate Guide to SP Flash Tool for Xiaomi MTK (MT6765 / MT6785)
: Flashing will wipe all internal storage. Back up your photos, contacts, and documents. Required Software Downloads
In the field, load MTK_AllInOne_DA.bin (found inside the SP Flash Tool folder) or the custom DA file provided with your firmware. sp flash tool for xiaomi mtk mt6765 mt6785
Flashing a MediaTek-based Xiaomi device requires a specific approach due to modern security protocols like secure boot and the MediaTek Authorization (DA/Auth) system. This comprehensive guide covers everything you need to safely use SP Flash Tool on Xiaomi MT6765 and MT6785 devices. Supported Xiaomi Chipsets & Devices
Hold the key while clicking Restart in the Windows Start Menu.
Step 1: Install Drivers and Disable Driver Signature Verification In the field, click Choose, navigate to your
(Helio G90T/G95) power popular budget and mid-range Xiaomi, Redmi, and Poco devices. However, because modern Xiaomi MediaTek devices implement strict Secure Boot and Download Agent (DA) SLA/DAA authentication routines, simply connecting your phone to the tool will result in errors like STATUS_SEC_AUTH_FILE_NEEDED .
What truly sets SP Flash Tool apart is its ability to bypass recovery and bootloader issues to write directly to the internal storage. Its core technical principle is based on the MediaTek chip's two-stage boot architecture: it communicates with the device in "BROM mode" (Boot ROM Mode). In this state, the device is running only its most basic, read-only boot code and does not rely on any higher-level system.
: Windows 10 or 11 (64-bit) is highly recommended. USB Cable : An original or high-quality data cable. Battery Charge : Ensure the phone has at least 50% battery. Back up your photos, contacts, and documents
| Scenario | Recommended Tool | | :--- | :--- | | Flashing custom ROM (LineageOS, Pixel Experience) | Fastboot (using fastboot flash commands) | | Unlocking bootloader | Mi Unlock Tool | | Soft brick (Boot loop, stuck in recovery) | Mi Assistant Recovery (MiFlash – Unbrick) | | IMEI repair after flashing | Maui META Tool or SN Write Tool | | Dead boot (No power, no USB detection) | ✅ |
Press and hold the for roughly 10–15 seconds until the device vibrates and the Xiaomi / Redmi logo appears.