Ensure you are aiming away from charged objects when zeroing. 6. Calibration Policy
Typically measures up to ±20kV (for older models like the 002/003) or ±30kV (for the 004).
The fieldmeter must be grounded through the operator or a dedicated ground lead to ensure user safety and measurement accuracy.
The manufacturer, SIMCO (now part of the Desco Industries group under the brand “SIMCO-Ion”), does not always host legacy manuals on their main landing page. Here is the most reliable method to obtain the :
Hold the meter 1 inch (25 mm) from the target surface. The two LED guide lights will form a single, concentric circle when the distance is correct. simco fmx002 manual full
A: While Simco-Ion does not host the legacy FMX002 manual online, this article aims to be a complete and thorough reference. For historical documents, contacting Simco-Ion support or searching second-hand marketplaces for a physical copy are possible options.
After approximately 15 hours of continuous use. The manual advises replacing the battery every 3 months even if not heavily used, because alkaline batteries can leak.
The instrument should be calibrated annually to ensure ASTM standards are met, typically for the 1-inch (25.4 mm) distance.
: Beeps for power on, over-range, and automatic power-off warnings. Maintenance & Safety Battery Replacement : Replace the Ensure you are aiming away from charged objects when zeroing
Point the sensor toward an uncharged area (or a grounded metal plate) and press the ZERO button. The display should read "0.00". Taking a Measurement: Move the sensor toward the object you want to test. Stop when the LED guide lights overlap.
models, its core operational procedures remain consistent with these later versions. Quick Setup & Operation Guide
The Simco FMX002 manual provides a comprehensive guide to understanding and operating the device. By following the step-by-step instructions and tips outlined in this blog post, you'll be able to get the most out of your Simco FMX002 and ensure safe and effective operation.
) indicates a negative charge; no sign indicates a positive charge. ⚠️ Maintenance & Safety The fieldmeter must be grounded through the operator
±5% of the reading, plus/minus 2 digits (e.g., for a 10kV reading, accuracy is ±0.5kV ±2 counts).
: Freezes the current reading and bar graph, allowing the user to move the meter to a more readable position in tight spaces. MODE/IB Button
, acting as a guide for its full operation, troubleshooting, and maintenance. 1. Product Overview and Key Features Simco-Ion FMX-002