Panel-mounted (DIN 43700) with an IP65-rated dust and splash-proof front face.
This comprehensive guide serves as an expanded reference manual to help plant engineers, technicians, and operators program, calibrate, and troubleshoot the EMC 2064 controller effectively. 1. Overview and Key Features
If you can provide a or any model number variant (e.g., EMC 2064A, 2064B), I can give you more specific key sequences or parameter names.
Maintain adequate clearance around the chassis for ventilation. Load Cell Connections emc 2064 weigh batch controller manual pdf
: Supports batching "into" a weigh hopper (controlling discharge gates) or "out of" a hopper (controlling refilling). Filling Control
6-digit LED (14mm) main display; 8-digit LED (7mm) sub-display Panel mounted (DIN 43700), IP65 dust/splash-proof front Operational Features
Eleven digital inputs allow connection to external switches, sensors, and remote controls. Panel-mounted (DIN 43700) with an IP65-rated dust and
The coarse feed output activates to quickly dump the bulk of the material.
I’m trying to troubleshoot a batching issue (material not cutting off correctly), and I need the original programming/calibration instructions. I’ve checked the EMC website but couldn’t find an archive for this older model.
: Includes an Auto Tune feature for automatic "in-flight" compensation, adjusting for material still falling after the feed gate closes. Overview and Key Features If you can provide
The real magic of the EMC 2064 lies in its ability to handle (or "free-fall") compensation.
The controller adds 10% too much of Material A. Manual solution: Navigate to the “Free Fall Compensation” parameter. The manual explains that after the feeder stops, material still falls into the hopper. You must measure the in-flight material and enter that value. Once adjusted, accuracy returns.
Related search suggestions (These are search-term suggestions to help find more resources or variants of the manual.)
Usability and practical value
The combination of correct feed gate and an EMC 2000 series Weigh Batch controller ensures TES Gross Weighers can operate fast and accurately. A two-speed filling radial feed gate with infinite adjustability is used for free-flowing granular products.