To get your printer back in service, follow these steps using the Resetter software on a Windows PC:
Because there is often no dedicated "L3256" selection in older software versions, users frequently select the model name, which uses the same internal architecture.
and that all antivirus software is temporarily disabled, as it may incorrectly flag the utility as a virus. Launch the Utility : Open the AdjProg.exe
Turn the printer back on. The flashing red lights should now be gone. ⚠️ Important Warnings epson adjustment program l3256
Connect it to your Windows PC using a high-quality USB cable.
The tool will display a message: "Please turn off the printer."
If you reset the software counter multiple times without addressing the physical pads, the waste ink will eventually overflow. This can cause permanent damage to your printer's internal logic boards or ruin the surface beneath your printer. What you should do: To get your printer back in service, follow
: Turn the printer off and then back on when prompted to complete the process. Important Considerations Physical Maintenance
: The primary use for this tool is to reset the "Main Pad," "Platen Pad," and "Ink System Pad" counters back to 0%. Diagnostic Reports
Check the boxes for , Platen Pad Counter , and Ink System Pad . The flashing red lights should now be gone
This article is for educational purposes only. The author is not responsible for any damage to your printer or computer resulting from using third-party adjustment software. Always back up your data and work at your own risk.
Epson Adjustment Program (also known as a resetter) is a utility software used to reset the internal counters of Epson printers—specifically the Waste Ink Pad Counter Epson L3256