The CWFL-6000 utilizes an intelligent T-507 (or updated series) dual-display temperature controller. It features two primary operational modes: and Constant Mode . Mode Differences
Use clean, braided polyurethane or stainless steel hoses. Avoid sharp kinks to prevent flow restriction. 3. Water Quality and Filling Procedures
: Houses the high/low-temperature water inlets and outlets (Rp 1/2" and Rp 1" fittings), an integrated visual water level gauge, a structural wastewater drain port, and the terminal electrical junction box. Step-by-Step Installation Guide
Designed specifically for demanding applications, the CWFL-6000 is not a standard cooler. Its foundation is a , a crucial feature that allows it to simultaneously manage the distinct cooling needs of a 6kW laser source and its optical components, preventing the condensation and thermal stress that can degrade beam quality and shorten component lifespan. cwfl-6000 manual
When the chiller beeps and the red light flashes, operators often panic and shut down the laser. Pause and consult the alarm table in your . Here are the most common codes:
: Connect the chiller to a stable, correctly rated power source matching the unit's voltage requirement, and ensure a firm ground connection.
Following the official ensures your 6kW laser chiller operates efficiently, preventing downtime and protecting your investment. By prioritizing proper installation and regular maintenance, you ensure the longevity and reliability of your laser cutting or welding operations. The CWFL-6000 utilizes an intelligent T-507 (or updated
Ensure the power supply matches the machine's requirements and is properly grounded. For maintenance, wait at least 3 minutes after cutting power to allow electrical discharge. Parameter Settings & Controller Modes The temperature controller typically operates in two modes:
For further technical support, replacement filter part numbers, or specific wiring diagrams unique to your manufacture year, contact an authorized Teyu S&A service center with your machine's unique serial number located on the side identification plate.
Add S&A approved laser-grade anti-freeze (usually a specific ratio of Ethylene Glycol or Propylene Glycol). Never exceed a 30% mixture ratio , and drain it completely as soon as spring arrives. Avoid sharp kinks to prevent flow restriction
The core of the CWFL-6000's design is its user-friendly intelligence. The front panel features a wire LCD controller that acts as your command center, enabling precise ±1°C temperature adjustments. This intelligence supports multiple advanced functions for full control over your cooling process:
The chiller automatically adjusts the water temperature based on ambient temperature (usually maintained at 25-30°C to prevent condensation).
Connect "Optics Outlet" to the laser head/QBH connector, and "Optics Inlet" to the laser head return line.
| Feature | CWFL-6000ENW12 | CWFL-6000FNP / ENP | | :--- | :--- | :--- | | | 6000W (nominal) | 6000W | | Temperature Stability | ±1°C | ±1°C | | Control Range | 5°C ~ 35°C | 5°C ~ 35°C | | Power Supply | AC 3P 380V 50Hz | AC 3P 380V 50/60Hz | | Compressor Power | 3.05 kW | 3.05 kW / 4.2 kW | | Tank Capacity | 22 L | 70 L | | Dimensions (L x W x H) | 142 × 73 × 113 cm | 105 × 71 × 136 cm (ENP) | | Weight (Net) | 164 kg | 170 kg |