I--- Download Driver Cutting Plotter Jinka 1351 _hot_ < Trending — 2025 >

Plug the USB cable from the Jinka 1351 into a USB 2.0 port on your PC (avoid USB 3.0 blue ports if you encounter stability issues). Power on the cutting plotter. 3. Verify the COM Port Right-click the Windows Start menu and open . Expand the Ports (COM & LPT) section. Look for USB-SERIAL CH340 (COMX) or USB Serial Port (COMX) .

The Jinka 1351 cutting plotter is a high-performance device designed for precision cutting and plotting applications. With its advanced features and robust construction, this device has become a popular choice among professionals and hobbyists alike. However, to unlock its full potential, you need to install the correct driver software.

Do pay for “driver download tools” that claim to fix your Jinka 1351. The correct driver is free. If your machine is brand new, the driver is usually included on the mini CD-ROM inside your plotter’s box.

If you purchased software like ArtCut, SignMaster, FlexiSign, or Sure Cuts A Lot, their installation directories often include a Drivers folder containing tested, safe versions of the Jinka USB-to-Serial utilities. Step 3: Step-by-Step Installation Guide i--- Download Driver Cutting Plotter Jinka 1351

However, like many Chinese-manufactured plotters (often rebranded as Liyu, Pulinx, or GCC clones), the driver installation is not automatic. Users frequently encounter the dreaded error on the plotter’s LCD screen or within the cutting software (e.g., SignMaster, ArtCut, FlexiSIGN).

If you see a yellow exclamation mark , the driver did not install correctly (see Troubleshooting).

04/25/2026 | Category: Plotter Drivers & Software Plug the USB cable from the Jinka 1351 into a USB 2

Connect the Jinka 1351 to a USB port on your PC and power the plotter on. Step 3: Verify the Device Manager COM Port

Follow these steps to complete the installation on Windows 10 or Windows 11. 1. Run the Installer Disconnect the Jinka 1351 from your computer.

It is crucial to download drivers from reputable sources to avoid malware. The Jinka 1351 is often rebadged, but the underlying USB chip usually requires a or a specifically designed Jinka USB driver . Verify the COM Port Right-click the Windows Start

Your operating system should emit a chime, signaling that it detects the hardware via the newly installed driver. 3. Verify in Device Manager

The driver serves as the communication bridge between your computer (operating system) and the Jinka 1351 hardware. Without the correct driver, your computer cannot send the necessary cutting commands, leading to: Cutting software not recognizing the machine Irregular cutting patterns

Follow these steps to ensure your computer correctly communicates with the plotter: Extract the Files

Once the driver is active in Device Manager, you must match the connection settings inside your preferred design and cutting software. General Port Settings