Up And Glow Crystals Instructions Fixed |link|: Science Squad Ultimate Light

This usually happens if the jar was bumped or shaken during the first 48 hours.

Too much water was used. The solution wasn't saturated enough.

The final step is to illuminate your crystals with the UV light. Follow these steps:

Step 2: Dissolve the Crystal Powder (The Science of Saturation) This usually happens if the jar was bumped

The kit is an educational science set designed to teach children about chemistry and geology through the growth of vibrant, luminescent crystals. By combining specific chemical compounds with hot water and allowing them to settle on a base, users can create structures that illuminate when placed on the included LED base. Kit Contents

: Cover your workspace with newspaper and wear the provided safety goggles. Dedicated Tools : Use a saucepan or bowl that will no longer be used for cooking to mix and heat chemicals. Growing Instructions Boil Water : Heat approximately 200 mL (6.75 oz) of water to a boiling temperature. Mix Solution

Cover your table with old newspapers, a plastic tablecloth, or a garbage bag. The dyes can permanently stain wood, fabric, and countertops. The final step is to illuminate your crystals

Have an adult pour the boiling water into your heat-resistant mixing jar.

Place your dry crystal directly onto the center of the LED lens.

You’ll see growth in 24 hours, but for "Ultimate" results, leave it for 7 to 10 days . Kit Contents : Cover your workspace with newspaper

Use a spoon to gently lift the crystal cluster out of the container.

By following these instructions and taking the necessary safety precautions, you'll be able to create your own beautiful, glowing crystal with the Science Squad Ultimate Light Up and Glow Crystals kit. Have fun and happy experimenting!

Always wear the provided safety goggles and gloves to prevent skin or eye irritation from the chemical powders.

Whether you lost your manual or the original "fixed" instructions still aren't making sense, here is the foolproof way to get those crystals growing and glowing. Phase 1: The Prep Work (Don’t Skip This!)

After three failed attempts (and one chemistry degree’s worth of research), we have cracked the code. Below are the for the Science Squad Ultimate Light Up & Glow Crystals kit.