Bypass "Windows was unable to complete the format" errors.
Firstchip FC1178/FC1179 MPTools V1.0.5.2: Comprehensive Guide to USB Repair and Firmware Updates
Select and click Start. Once it reaches 1% or shows an error, click Stop. Factory Reset : Return to settings and switch the mode to Factory Scan . Confirm the correct Flash ID is detected.
Try a different USB port or ensure the drivers are correctly installed. --- Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 -
This process is destructive. All data on the USB drive will be permanently erased.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
(Multi-Production Tools) is specialized software designed for factory-level maintenance of USB flash drives utilizing Firstchip controllers. Bypass "Windows was unable to complete the format" errors
Restore a drive to its true storage size if it was spoofed.
Ensure the scanning settings are set to thoroughly check for bad blocks. Step 5: Connect and Start Processing
Before using MPTools, you must download and run a utility called . This free tool scans a connected USB drive and identifies the "Controller Vendor" and "Controller Part-Number". The results should clearly show "FirstChip" and "FC1178" or "FC1179". The same tool can also be used to gather the NAND Flash ID, which is important for configuration. Factory Reset : Return to settings and switch
Click the Start button. The tool will begin low-level scanning and flashing the firmware.
: Software like Mptools is typically used for device management, firmware updates, configuration, and diagnostics. If you're using this tool, you're likely working in an environment where you're configuring or updating firmware on Firstchip devices.
You can select a pre-defined capacity or let the tool automatically determine the best fit for your NAND flash memory. 4. Running the Flash Process Click "Start" or "Product" to initiate the process.
MPTools (Mass Production Tools) are specialized software utilities used by manufacturers to flash firmware, partition NAND memory, and set drive parameters (like LED behavior and Vendor IDs). Unlike standard formatting tools, MPTools communicate directly with the USB controller chip to repair low-level errors.