Loading

Please visit your MyISACA Dashboard to view your current membership and/or certification status. You can reactivate your certification(s) and/or membership via MyISACA. If payment is required, an additional $10 Reactivation fee due to late payment will be incurred. If you need to submit the required CPE for 2025, you may do so through your MyISACA dashboard. 

Expand

Dc E2h Datasheet __top__ Now

The input and output grounds are not connected internally. Do not tie them directly unless your system requires non-isolated operation (defeating the purpose of the E2H). Use the isolation barrier to break ground loops.

The pin marking of "DC=E2H" on the RT9193-18GB indicates a fixed output voltage of at up to 300mA .

RH850/E2H Electrical Characteristics User's Manual - Renesas dc e2h datasheet

Are you designing a and need advice on capacitor selection for this LDO? TX6211B Series High Speed Low Noise LDO - STM32-base

The device is housed in a miniature, 5-pin SOT-23 surface-mount package. Its pinout configuration is structured for efficient PCB layout tracking. The input and output grounds are not connected internally

In modern electronics design, managing power efficiently within highly constrained board spaces is a top priority for hardware engineers. When searching for the , you are diving into the technical specifications of a widely utilized electronic component: the RT9193-18GB Low Dropout (LDO) linear regulator .

However, based on standard electronic component nomenclature: The pin marking of "DC=E2H" on the RT9193-18GB

+------------------[ RT9193-18GB ]------------------+ | (DC=E2H) | | | Vin ----->+----[ VIN ] (Pin 1) (Pin 5) [ VOUT ] +-----> Vout (1.8V Fixed) | | | [ GND ] (Pin 2)-----\ | | | | Enable --->+ [ EN ] (Pin 3) | | | | | | [ BP ] (Pin 4) | | +-------+----------------+--------------------------+ | | | === C_bp === C_in === C_out | (22nF) | (1uF) | (1uF) | | | GND ------------+-----------------+--------------------------+--------> GND Layout Guidelines for Best Performance

Unregulated VIN ---[ 1uF Cap ]---+--- Pin 1 (VIN) Pin 5 (VOUT) ---+--- Regulated 1.8V OUT | | [GND] [ 1uF Cap ] | | Logic Control -------------------+--- Pin 3 (EN) Pin 4 (BP) +--- [GND] | [ 22nF Cap ] | [GND]

The input and output grounds are not connected internally. Do not tie them directly unless your system requires non-isolated operation (defeating the purpose of the E2H). Use the isolation barrier to break ground loops.

The pin marking of "DC=E2H" on the RT9193-18GB indicates a fixed output voltage of at up to 300mA .

RH850/E2H Electrical Characteristics User's Manual - Renesas

Are you designing a and need advice on capacitor selection for this LDO? TX6211B Series High Speed Low Noise LDO - STM32-base

The device is housed in a miniature, 5-pin SOT-23 surface-mount package. Its pinout configuration is structured for efficient PCB layout tracking.

In modern electronics design, managing power efficiently within highly constrained board spaces is a top priority for hardware engineers. When searching for the , you are diving into the technical specifications of a widely utilized electronic component: the RT9193-18GB Low Dropout (LDO) linear regulator .

However, based on standard electronic component nomenclature:

+------------------[ RT9193-18GB ]------------------+ | (DC=E2H) | | | Vin ----->+----[ VIN ] (Pin 1) (Pin 5) [ VOUT ] +-----> Vout (1.8V Fixed) | | | [ GND ] (Pin 2)-----\ | | | | Enable --->+ [ EN ] (Pin 3) | | | | | | [ BP ] (Pin 4) | | +-------+----------------+--------------------------+ | | | === C_bp === C_in === C_out | (22nF) | (1uF) | (1uF) | | | GND ------------+-----------------+--------------------------+--------> GND Layout Guidelines for Best Performance

Unregulated VIN ---[ 1uF Cap ]---+--- Pin 1 (VIN) Pin 5 (VOUT) ---+--- Regulated 1.8V OUT | | [GND] [ 1uF Cap ] | | Logic Control -------------------+--- Pin 3 (EN) Pin 4 (BP) +--- [GND] | [ 22nF Cap ] | [GND]

Learning

Was this article helpful?



Track your requests

Submit a request

Knowledge base / FAQs

Submit application

©2026 ISACA. All rights reserved.

Support is available 24 hours/day, 7 days/week

Address: 1700 E. Golf Road, 3rd Floor, Schaumburg, IL 60173

Phone: +1-847-660-5505 or Toll-free: +1-855-549-2047

International Toll free numbers



Loading
Learning: How do I access my Question, Answer and Explanations (QAE) database?