[top] Download Driver Jinka 721 For Windows 10 Work Now

SignMaster features excellent native support for Jinka plotters. Open the software connection wizard, select Jinka and JK721 , and choose Direct COM Port connection . Select your designated COM port from the drop-down menu.

: In your cutting software (like Artcut, SignMaster, or AnyCut), set the output port to match the one found in Device Manager (e.g., COM3 ).

Right-click your newly recognized serial port entry and choose .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. download driver jinka 721 for windows 10 work

Open the extracted folder, right-click on SETUP.EXE (or CH341SER.EXE ), and choose Run as administrator . Install: Click the "Install" button.

If Windows can’t find a driver automatically:

: Ensure you are using a high-quality RS-232C serial cable if you are not using the direct USB connection, as standard serial cables may not communicate correctly. : In your cutting software (like Artcut, SignMaster,

Older Prolific chips (PL2303HX) are phased out and intentionally blocked by newer Windows 10 updates. If you have an older Jinka 721 with this chip, you may need to download an older Prolific driver version (such as v3.3.2.102) to bypass the "Code 10" error. Step 3: Step-by-Step Installation Process on Windows 10

Ensure the COM port is matched in the Device Manager and the software.

: If the driver is installed but the port doesn't show up, try a different USB port on your PC or restart the computer with the cutter plugged in. Software Compatibility This link or copies made by others cannot be deleted

Most Jinka 721 machines use one of two main communication chips:

Fully compatible with Windows 10 (32-bit and 64-bit architectures). For FTDI Chips Source: FTDI Chip Official Website Search Term: "FTDI VCP Drivers Windows 10"