This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Install a 120-ohm DMX terminator into the last light's output port. Swap out cables one by one to find the damaged cord. Scenes are not saving to memory slots. Program mode was not activated or timed out.
Press Auto/Del to activate automatic scene changes. Adjust Speed and Fade Time faders to control the tempo. disco 240 dmx controller manual
A bank holds up to 8 scenes (one per scene button).
Once your programming is complete, you can trigger your light show using three different playback styles: Manual Mode This public link is valid for 7 days
When your show is complete, press the button again. The LED light turns off , saving all your data to the internal 128K memory.
The manual details a few pro tips to get more out of your console: Can’t copy the link right now
Press and hold the button for 3 seconds to enter programming mode. Select the Chase button (1–6) you wish to program.
Because the console forces 16-channel spacing, your light's starting address must be set as follows:
Activate the corresponding button to control a fixture set to these standard starting addresses: Scanner 1 : Address 1 Scanner 2 : Address 17 Scanner 3 : Address 33 Scanner 4 : Address 49 Scanner 5 : Address 65 Scanner 6 : Address 81 Scanner 7 : Address 97 Scanner 8 : Address 113 Scanner 9 : Address 129 Scanner 10 : Address 145 Scanner 11 : Address 161 Scanner 12 : Address 177 Physical Connection Steps
is a professional console capable of controlling up to 12 fixtures with 20 channels each, totaling 240 channels. It is designed for managing complex lighting setups like moving heads (scanners), par cans, and effects. Channels: 240 DMX channels total. Fixture Control: Supports up to 12 scanners (fixtures).