Rm-0145 Manual ((link))

Plug the provided power cable into the rear port of the RM-0145 and connect it to a standard wall outlet. The LED indicator light will briefly flash blue and then settle into a slow, rhythmic blinking amber or red pattern, indicating the device is ready for initialization. Programming and Configuration

Safety & compliances

Press and hold the and POWER buttons simultaneously until the indicator light stays on.

:

Press the button again to exit the setup mode and lock the code. Locking the Settings

Because it is a universal remote, the RM‑0145 does not require any special drivers or software – you simply point it at your TV and send commands once it has been correctly programmed.

On some models, numeric keys correspond to brands (e.g., "1" for Samsung, "2" for Sony). rm-0145 manual

A: The RM‑0145 outputs modern IR codes. Some very old CRT televisions use a different IR protocol. In that case, you need a remote specifically designed for that era of TV.

Turn on your TV and locate your brand's codes within your printed user guide.

If the code‑search method does not work (or you lost the code list), you can try the function: Plug the provided power cable into the rear

The moment your device turns off, stop pressing the button. Press the OK/Select button immediately to save the code. The LED indicator will flash twice to confirm.

If the power button works but the volume does not, the remote may have found a "partial match." Repeat the Automatic Search to find a more compatible code.

This is the easiest method if you do not know your TV's specific code. Point the remote directly at the TV. : Press the button again to exit the

Press and hold [SET] and [POWER] until the indicator light stays on, then release.