Press down and firmly on the physical keypad.
While holding down the button, connect the Mini-USB cable to the scanner and the other end to your PC.
If you encounter a problem not covered here, visit the official Vgate Forum or contact support via their website. Avoid YouTube "hack" videos promising unlocked features; they often distribute malware or corrupt firmware.
: Within the tool, navigate to the folder where you saved the new firmware file.
: Click the "Update" or "Download" button. Do not disconnect the USB cable or turn off the computer while the progress bar is moving, as this can brick the device. how to update vgate maxiscan vs890
: Try using a different USB port (preferably a USB 2.0 port on the back of the motherboard if using a desktop). Ensure you are using a data-sync cable, as some mini-USB cables only transfer power.
generally requires a PC and the official update tool from the manufacturer. : Note that the Vgate VS890
: Open the update tool. It should automatically detect your connected scanner and display the current firmware version.
The scanner must be booted in a specific mode to accept new firmware from the computer. Do not simply plug it into the OBD2 port of your vehicle during this process. Press down and firmly on the physical keypad
Power the scanner on. (You can do this by plugging it into a vehicle's OBD2 port or plugging the Mini-USB back into a power source). Navigate through the device menu to or About .
⚠️ Do not unplug the USB connection, close the desktop program, or allow the PC to enter sleep mode during this operation. Interrupting the process will corrupt the flash memory bank and permanently brick the diagnostic tool. Step 5: Finalize and Verify the Upgrade
Before you connect your VS890 to a computer, you must prepare. Half of all failed updates occur because users skip these steps.
If prompted, install the necessary USB drivers so your computer can recognize the scanner Connect to PC Do not disconnect the USB cable or turn
Connect the scanner to a vehicle's OBD2 port or plug it back into a USB port to power it up.
There are two ways to obtain the update software:
Open the extracted update tool application (commonly named VS890_Update.exe ).