Hytera Tc 610 Programming Software - ((exclusive))
A PC26 programming cable is required to connect the radio's audio jack to a PC USB port.
The Hytera CPS is a lightweight Windows-based application. It is compatible with most modern Windows operating systems.
Set to High (5W for VHF / 4W for UHF) for maximum range, or Low (1W) to conserve battery life in close-quarters environments. hytera tc 610 programming software
: You need a specialized PC19 programming cable (USB to 2-pin connector) compatible with Hytera radios.
Before plugging in the cable, ensure the driver is installed. When you plug the PC26 cable into your USB port, Windows should recognize it. Check Device Manager to identify which COM port is assigned to the cable (e.g., COM3 or COM4). 3. Connecting the Radio Ensure the radio is turned off. Plug the programming cable into the radio's accessory jack. Turn the radio on. How to Use the Hytera TC-610 Programming Software A PC26 programming cable is required to connect
In the software, you will find a table for channel configurations.
Open the Windows (Right-click Start > Device Manager). Expand the Ports (COM & LPT) section. Set to High (5W for VHF / 4W
The Hytera TC610 programming software offers several benefits, including:
Out of the box, commercial two-way radios require precise configuration to match local regulatory frequencies and team workflows. The programming software serves as the control hub for your equipment. Key Benefits
: Ensure the 2-pin connector is pushed completely into the radio housing. Dust or tight plastic casing can sometimes prevent a clean connection.






