Ld-c101 Usb To Ci-v Driver

The Ultimate Guide to the LD-C101 USB to CI-V Driver: Setup, Troubleshooting, and Radio Control

The LD-C101 USB to CI-V driver is a software component that enables communication between a computer and certain devices, such as amateur radio transceivers, that use the CI-V (Controller Interface V) protocol. This protocol is commonly used in amateur radio equipment to allow for remote control and data transfer.

: Works with virtually all Icom radios equipped with a "Remote" or CI-V jack.

Yes, with the correct Silicon Labs CP210x driver (v11.2.0 or later) . Prolific-based units may fail. Ld-c101 Usb To Ci-v Driver

To find out which chipset your specific LD-C101 cable uses, plug it into your computer, open , and look under the Ports (COM & LPT) or Other Devices section. An exclamation mark next to the device indicates that the driver is missing or incorrect. How to Download and Install the Correct Driver

USB power issue. Try a different USB port (preferably directly on motherboard, not a hub). Also, check your LD-C101 cable for shorts.

Commonly used alternatives that offer excellent performance but require distinct device drivers. The Ultimate Guide to the LD-C101 USB to

The LD-C101 is a USB-to-CI-V interface adapter used to connect a computer (via USB) to Icom radios' CI-V (control) serial bus for CAT control, command/response, and automation. It provides USB virtual COM port connectivity and signal-level conversion appropriate for Icom CI-V protocols.

: Common in standard LD-C101 models. It appears as "Silicon Labs CP210x USB to UART Bridge" in Device Manager.

While some CI-V cables on the market use chips from FTDI, the LD-C101 is widely reported to be built around the popular and affordable from the Chinese manufacturer Nanjing Qinheng Microelectronics (WCH). This is the key piece of information for finding and installing the correct driver. Yes, with the correct Silicon Labs CP210x driver (v11

Even with the correct steps, problems can occur. Here are solutions to the most common issues.

: As the primary manufacturer of the LD-C101 cable , Chelegance provides direct links to compatible drivers for Windows 10 and 11.

The is a specialized USB-to-3.5mm control cable designed for Icom amateur radios using the CI-V (Computer Interface Five) protocol. It acts as a bridge, allowing your computer to manage radio frequencies, logging, and remote operations through standard ham radio software. Review Summary: LD-C101 USB to CI-V Cable Chipset

Windows can automatically turn off USB ports to save power. In Device Manager, right-click your COM port, go to Properties -> Power Management , and uncheck "Allow the computer to turn off this device to save power." Conclusion