Anilam Mini Wizard A163 Manual Access

Shift the logical direction from positive ( + ) to negative ( - ) to orient the machine coordinates correctly relative to your workpiece. 3. Radius vs. Diameter Mode (Lathe Specific)

Anilam (now part of and Acu-Rite Companies ) no longer officially supports the Mini Wizard A163. However, that does not mean the manual is lost to history. Here are the most reliable sources.

Press the Clear key to reset. Check scale cable connections. Scale misalignment or physical slip.

I can provide pins-out diagrams, calibration steps, or advice on modern drop-in replacements. Share public link

The is a compact, multi-axis Digital Readout (DRO) system designed for precision machining equipment such as milling machines, lathes, and grinders . It processes signals from linear glass scales to provide real-time position feedback, improving speed and accuracy by reducing the need for manual measurements . Core Specifications & Features anilam mini wizard a163 manual

Press the or ZERO button. The corresponding coordinate plane will instantly register 0.0000 or 0.000 depending on your active resolution. Presetting Coordinates (Dimension Entry) When machining from a specific blueprint print datum point: Press the target axis key ( X or Y ). Press the SET key.

In the world of precision measurement and digital readouts (DROs), few names carry the legacy of reliability and innovation quite like . For decades, Anilam has been a cornerstone in machine shops, tool rooms, and manufacturing floors, providing operators with the tools needed to achieve sub-millimeter accuracy on manual mills, lathes, and grinders.

Tell me what you're working on and I can dig into the technical specifics for you.

: The third digit from the right toggles between radius ( 1 ) and diameter ( 0 ), the latter of which doubles the count for lathe work. Shift the logical direction from positive ( +

If the DRO skips counts or displays an error code, the internal optical glass scale may be contaminated with oil or fine dust. Carefully remove the rubber lip seals on the scale housing and wipe the glass elements with a lint-free cotton swab saturated with high-purity isopropyl alcohol. Let dry completely before re-assembling.

You have the manual (or you are still searching). Should you keep the Mini Wizard?

If you choose to replace the readout but keep your existing scales, confirm that the scale output (typically TTL square wave) and connector pinout are compatible with the new DRO.

To set a reference point, move the machine to the desired position and press the corresponding axis button (X or Y), followed by the Set key (or a dedicated Zero button depending on the specific faceplate revision). Diameter Mode (Lathe Specific) Anilam (now part of

: The LCD shows nothing, or numbers flicker and change.

Note: If you are mating this to a new Sino or Ditron scale, the pinouts will not match. The manual does not cover this; you will need a signal converter.

The is a legacy digital readout (DRO) system designed to provide high-precision position feedback for manual machine tools such as mills, lathes, and grinders. While discontinued, it remains a staple in small metalworking shops and hobbyist garages due to its rugged die-cast housing and reliability. Core Specifications & Features