Nalco 93033 Msds 2021 _verified_ Jun 2026

Because Nalco Water , facilities must use official request portals to secure the certified Ecolab Nalco Water SDS/MSDS Request Form .

Risk of significant eye irritation; immediate flushing is required upon exposure. Corrosive to Metals:

Nalco 93033 is a cooling water additive designed to prevent corrosion and scale buildup in industrial cooling water systems. It is commonly utilized where phosphorus-free formulations are required, offering a green alternative to traditional corrosion inhibitors.

The chemical is classified as aggressive and can pose risks to human health upon exposure: Eye and Skin Contact: nalco 93033 msds 2021

This initial section establishes accountability and provides the vital operational contacts needed during industrial audits or chemical emergencies. : Nalco® 93033 / Nalco® 93033B

Ecolab's policy is to include the corresponding SDS/MSDS with the physical shipment of every product purchase. Ensure you are referencing the version specific to your region, as regulatory requirements (such as California's SB 258) may alter the disclosed information. Safety Data Sheets - SDS - MSDS - Ecolab

, serves as the definitive document for regulatory compliance, handling, and environmental safety. Product Overview and Application Nalco 93033 is primarily utilized as a liquid oxidizing biocide Because Nalco Water , facilities must use official

NALCO 93033 is classified as a hazardous material for transport. The specific classification is consistent with corrosive, environmentally hazardous substances. The relevant UN number and transport information can be found in the specific section of the official SDS, which would be consistent with sodium hypochlorite-based solutions.

The active ingredient in NALCO 93033 is , with a concentration of 150 g/L as active chlorine. Its Chemical Abstracts Service (CAS) number is 7681-52-9 . In the Netherlands, NALCO 93033 has a biocidal product authorization with number 13729 and has been approved for professional use only. It was originally a derived authorization of the product "Inovyn Sodium Hypochlorite 13.8%" (13692 N). The original authorization expiration date was set for June 1, 2022. However, due to ongoing regulatory review, the expiry of its authorization has been administratively suspended until June 1, 2025 . This action was taken to allow time to complete the decision-making process on the renewal application. This context is particularly important for users, as it highlights that the product's regulatory approval remains in a state of flux, making the latest safety information even more critical.

The product has a limited shelf life. It should be stored at temperatures not exceeding Ensure you are referencing the version specific to

Immediately flush eyes with plenty of water for at least 15 minutes, holding eyelids open. Seek medical attention.

: The product is registered with NSF International (Category Code G7), making it acceptable for use in and around food processing areas, provided that the treated water or steam does not contact edible products.

Immediately wash with soap and plenty of water. Remove contaminated clothing.