Mtk Imei V3.0 -

: Try a different USB port on your PC. Make sure you installed the correct MediaTek USB drivers.

IMEI modification is illegal in many jurisdictions unless you are restoring the original IMEI to a device you own. This tool must not be used to change IMEI for fraudulent purposes.

If you encounter problems, here are some common solutions:

: Use a reliable USB cord to connect your phone to your computer. Mtk Imei V3.0

Is your device still not connecting to the network after repairing the IMEI? It might be that the NVRAM is corrupted.

What is the or chipset of the device? (e.g., Helio G85, MT6765)

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : Try a different USB port on your PC

Click the or Write button on the screen. The software is now waiting to find your mobile device. Step 5: Connect Your Phone

Flashing a Custom ROM, Custom Recovery, or NVRAM error can erase the IMEI 1.2.5 .

Users strongly recommend backing up NVRAM data before attempting any IMEI repairs to prevent permanent signal loss. This tool must not be used to change

Many users search for "Mtk Imei V4.0" or "V5.0." Officially, the open-source development stalled after V3.0 because MediaTek introduced with hardware-bound encryption. As of 2025-2026, newer MediaTek chips (Dimensity 7200, 8200, 9300) prevent direct NVRAM writes via Meta Mode.

The tool communicates directly with the device’s NVRAM (Non-Volatile Random Access Memory)—a storage area that holds critical data like IMEI numbers, Wi-Fi MAC addresses, and Bluetooth addresses. When this NVRAM gets corrupted (often due to a failed firmware flash or a buggy custom ROM), the IMEI shows as "Unknown" or "Null". Mtk Imei V3.0 injects the original IMEI back into that NVRAM.

Due to a buggy update or accidental software corruption.

Once the IMEI numbers are entered, locate the , Flash , or Start button in the tool's interface and click it to begin the writing process.