Cp Plus Firmware Update ^new^ Download -

: For PC-based management and firmware pushes, you may also need KVMS Pro or the cVMS tool , both available on the official site. Step-by-Step Update Guide (USB Method)

Download official firmware from the CP PLUS support page and back up your device before proceeding — contact CP PLUS support if unsure.

Click Start or Upgrade . Do not touch the mouse, power button, or turn off the device during this process. The system will reboot automatically once finished.

: You can log in to the NVR's IP address through a web browser on a laptop connected to the same network. Navigate to the Info or System tab to upload the file directly from your computer.

Always download software directly from official manufacturing channels to avoid malware. The Official CP Plus Website cp plus firmware update download

A progress bar will appear. Once finished, the system will automatically reboot. Option B: Remote Upgrade via Web Browser

On your monitor, right-click, open the Main Menu , and go to System > Upgrade (or Maintain > Manager > Update depending on your UI version).

No. Video data on your hard drive remains intact. However, some settings (like passwords, motion detection zones) may reset to defaults. That’s why you should backup your configuration first.

Many CP Plus models share the same model name but have different hardware versions (e.g., V1, V2, or V3). Firmware is unique to each hardware version. Check this status via your device's system menu under > Version . 3. Back Up Your Current Configuration : For PC-based management and firmware pushes, you

Go to Main Menu > System > System Upgrade .

There are three official ways to obtain the firmware file.

Regularly monitor the CP PLUS website for security advisories or performance notices.

Plug the USB drive into the USB port of the DVR/NVR. Do not touch the mouse, power button, or

on your DVR/NVR. Take a photo of the version details and email it to support@cpplusworld.com to request the correct file. Download the File : Once you have the link, download the file and extract it on your PC to find the firmware file. 2. Prepare the USB Drive : Use a standard USB flash drive (FAT32 is recommended). : Copy the extracted firmware file directly to the root directory (not inside a folder) of the USB drive.

Open Internet Explorer or a compatible browser and type your device’s local IP address into the address bar. Log in: Enter your administrator credentials.

The device will progress through the update and automatically reboot. Do not power off the device during this process, as it can cause permanent hardware failure. Best Practices for Security