3.1 Last Updated: [Current Year] Compatibility: All V2000-c hardware revisions H1.2 and above.
Once wiring is triple-checked, apply power.
Power must cut off to unlock. Connect the lock to NC and COM .
The V2000-C RFID access control system is a reliable and effective solution for securing access to a premises or specific area. By following the user manual and configuration guide, administrators can ensure optimal performance and security. Regular maintenance and troubleshooting can help prevent system downtime and ensure smooth operation. V2000-c Rfid Access Control User Manual
This setting controls how long the door lock remains disengaged (unlocked) after a successful access attempt. The time is set in seconds.
If you are struggling with a specific setup, for example, a vs fail-secure lock, it is highly recommended to consult the full V2000-c manual PDF for detailed diagrams.
In programming mode, press 4 + Time in seconds (0-99) + # . (Factory default is 5 seconds). Resetting to Factory Defaults Connect the lock to NC and COM
If you need further help, please share details about your (magnetic or electric strike), your power supply model , or the specific programming step where you are encountering an issue. Share public link
Normally Closed (NC) – Connects to Fail-Safe locks (unlocks when power is cut, like magnetic locks).
Keep a printed copy of the programming codes near the control panel (but hidden from public view) for quick reference during maintenance. Terminal Wiring Definitions
A:
Wiegand 26 bits input & output (can operate as an external reader) LED Indicator & Audio Reference Normal Mode: Red LED is lit. Programming Mode: Green LED is lit or flashing. Valid Action: Short beep sounds. Invalid Action: Long, sustained error beep sounds. 2. Wiring Diagram and Installation
The V2000-C is a "Standalone" unit, meaning it does not require a constant network connection to work, but it can connect for management.
Enter a unique User ID (1-2500) + # + [4-6 digit PIN] + # . Press * to exit. Deleting Users Enter Programming Mode. Press 2 . By Card: Swipe the card you wish to delete. By ID: Enter the User ID + # . Press * to exit. 5. Advanced Settings Door Relay Time
1,000 to 2,000 users (depending on the specific hardware revision) Card Reading Distance: 3–6 cm Compatible Card Type: EM (125 kHz) ID cards or key fobs Lock Output Load: Max 3A Alarm Output Load: Max 20A Operating Temperature: -10°C to 55°C (14°F to 131°F) Dimensions: Approximately 117mm × 75mm × 20mm 2. Terminal Wiring Definitions
