Mara checked the drums. Each cap bore a small seal and a lot number. The label’s tiny print had been revised too; the chemical composition line now included a compound she didn’t recognize, an additive intended to increase efficacy while supposedly degrading faster in soil. The binders contained test reports claiming rapid breakdown. Yet the field note told a different tale: assays from a nearby lab had detected trace residues weeks after application.
The updated SDS registers ACTICIDE® MKW 2 under U.S. EPA Registration Number 67071-55 . It is formulated primarily for exterior applications where moisture, UV exposure, and heat degrade standard coatings.
: This designation is now prominently flagged for all international maritime transport. 8. Action Plan for Compliance Managers
Causes severe skin burns and irreversible eye damage. H317: May cause an allergic skin reaction (sensitization). H302 / H332: Harmful if swallowed or if inhaled. H410: Very toxic to aquatic life with long-lasting effects. Essential Precautionary Statements
: The updated SDS covers the specific risks associated with its active components: Octhilinone (OIT) 3-iodo-2-propynyl butyl carbamate (IPBC) Environmental Impact very toxic to aquatic life acticide mkw2 sds updated
A systemic fungicide that controls a wide spectrum of mold and fungal strains.
According to Section 8 of the updated SDS, standard laboratory or warehouse clothing is insufficient when handling concentrated Acticide MKW2.
Your for specific local regulatory frameworks (e.g., OSHA, REACH)
achieves its dry-film protective capabilities by combining three potent active ingredients. The product utilizes THOR’s unique AMME® encapsulation technology, which slows down ingredient leaching caused by UV exposure, heat, and rain: Mara checked the drums
Flush eyes with water for 15 minutes. Seek immediate medical attention.
: Polymer emulsions susceptible to premature microbial degradation. 2. Why the SDS Was Updated
: Refresh the SDS file on your internal corporate intranet.
Causes long-lasting, damaging effects to downstream ecosystems if uncontained. 4. Personal Protective Equipment (PPE) Requirements The binders contained test reports claiming rapid breakdown
Acticide® MKW2 is a highly effective, industrial-grade biocide formulation.It protects water-based coatings, adhesives, and building materials from microbial spoilage.Regulatory agencies frequently update chemical safety standards worldwide.Consequently, Thor Group has issued an updated Safety Data Sheet (SDS) for this product.This article breaks down the essential modifications in the updated Acticide® MKW2 SDS.It provides actionable compliance guidance for facility managers, safety officers, and formulations chemists. 1. Product Identification and Overview
: Incorporate the biocide at any stage of the production process, although addition during the final stage is generally recommended for optimal stability.
THOR utilizes its proprietary . This locks the active chemicals inside a protective matrix, preventing moisture leaching and UV degradation. 2. Hazard Identification and Signal Words
: The EPA-approved label indicates specialized levels for different materials, often ranging based on the vulnerability of the substrate to fungal attack.
A 2023–2024 update likely tightens labeling for skin sensitization due to MIT/Bronopol.