Use the arrow keys to select the exact time you want the towel rail to start heating up. Tip: Set this 30 to 45 minutes before your shower. Press PROG to lock it in.

Follow these steps to set the time and create a heating schedule for your Skope towel rail. 1. Setting the Current Time Ensure the unit is powered on.

Common button symbols: = Program ▲ / ▼ = Adjust MODE = Auto / On / Off OK / ENTER = Confirm

Press and MIN to set the exact time you want the towel rail to start heating.

Most Skope-compatible timers feature a digital display with four or five primary buttons: , Plus/Minus (for temperature), and a Clock/Timer icon.

If your unit features a full weekly programmer, follow these steps:

To program the timer on a , you typically interact with the electronic controller on the unit's faceplate to set the real-time clock and schedule operating periods. Programming Instructions

If you want a second burst of heat in the evening, repeat the steps for "2 ON" and "2 OFF."

Operates strictly according to the schedule you have programmed.

The feature is ideal for one-off drying outside of your scheduled routine. Towel Rail Timer Kit 230V 350W 2-W - Cabac

Most standard Skope models operate on a factory-preset cycle.

By properly programming your Skope heated towel rail timer, you can ensure a luxurious, energy-efficient experience in your bathroom every day.

: Press MODE to make the hours flash, adjust with +/- , then press MODE again to switch to minutes and repeat the process.

Switch the unit OFF and then back ON quickly (within 10 seconds ) to add 1-hour increments to the heating period.

: Press Set again or wait 10 seconds for the system to automatically save the new value. Troubleshooting & Best Practices