, plug it back into your server, and power it on .
Since you cannot access the web GUI, try to shut down the server safely using the physical hardware.
If you use Docker containers that require their own IP addresses on your custom network, ensure that Enable bridging is set to Yes .
This guide will walk you through every method to reset your network configuration, from simple file deletions to advanced command-line fixes and complete fresh installs. unraid reset network settings install
Avoid holding down the power button (hard shutdown) unless the system is completely unresponsive, as this can cause file system corruption. Step 2: Remove the Unraid Flash Drive Unplug the USB boot flash drive from the server.
: Unraid will automatically recreate these files with default settings, typically requesting a new IP address via DHCP. Reset via Command Line (CLI)
: Navigate to the Main tab, click the Flash drive, use the file browser icon, and delete the files from the config folder . , plug it back into your server, and power it on
If you use Docker containers or Virtual Machines, ensure that is set to Yes . This allows your VMs and containers to get their own dedicated IP addresses on your network.
Your attempt at link aggregation or VLAN tagging went wrong, breaking your connection. Method 1: The Offline Reset (Recommended)
If you need to fix a broken static IP address instead, modify the following lines to match your local router's subnet: This guide will walk you through every method
Method A: Resetting Network Settings via Command Line (Console)
Once your server reboots with default settings, it will have a new IP address assigned by your router. To log back into the WebUI, try these methods:
If you have a monitor and keyboard connected directly to your Unraid server, you can reset the network settings using the command line without removing the USB flash drive. Step 1: Log In to the Server
Set to Static if you want to assign a permanent IP address directly on the server, or leave it on DHCP and create a DHCP reservation inside your router settings (highly recommended).