Prosecure Opti Combi Manual English -

Always turn off the automatic door controller's main power supply before starting the electrical connections.

I can provide the exact button-press sequence or terminal wiring layout for your specific door controller. Share public link

The safety curtain is hitting the moving door panel. Tilt the IR module outward. Frequent Troubleshooting Scenarios The door opens and closes continuously (ghosting/cycling)

This guide provides a comprehensive overview of the ProSecure Opti Combi manual English. By following the installation, operating, and maintenance instructions outlined in this guide, you can ensure your boiler operates efficiently and safely. If you have any further questions or concerns, please consult the manufacturer's instructions or contact a qualified engineer.

Up to 2 lines of dense infrared spots Supply Voltage: 12–24 V AC ±10% / 12–30 V DC ±10% Power Consumption: Less than 2.5 W (VA) prosecure opti combi manual english

Microwave radar for motion detection + Active Infrared (AIR) for presence detection.

The Opti Combi can store up to 99 custom programs.

of infrared spots activated simultaneously. 6. System Testing and Troubleshooting

Walk test the detection area to ensure the sensor detects presence (red light) and motion (green light). 3. Programming and Settings Guide (English) Always turn off the automatic door controller's main

Adjust the tilt screw on the AIR module to angle the safety rows (-4° to +4°).

Press the button on the circuit board once. The LED will flash rapidly in green and red. Step completely out of the detection zone for 10 seconds.

The is a high-performance, combined sensor system manufactured by dormakaba , designed for automatic industrial and commercial doors . It integrates radar motion technology for door activation and active infrared (AIR) technology for user safety. This combined approach ensures reliable opening while protecting users from being struck by closing doors, particularly in industrial environments requiring compliance with safety standards such as EN 16005.

The presence timer is set to "Infinite," and the background has shifted due to weather or seasonal changes. Perform a manual system reset. Issue: Red/Yellow LEDs flash continuously Tilt the IR module outward

Adjust the screw or lever governing the infrared curtain angle. Ensure the safety rows fall directly in front of the moving door leaf line.

Use a soft, damp cloth. Avoid aggressive cleaning agents that could damage the optical lens

Tilt the radar module up slightly, or adjust the infrared safety curtain further away from the door face. The door will not close, and the safety LED stays on

The safety curtain is hitting an object within its field (e.g., a doormat or structural frame). Use the buttons to recalibrate the background environment profile.