Gunnebo Speedstile Fl Installation Manual ((link)) 【2026 Release】

depending on run length), rated for 230V AC or 115V AC single-phase.

With mechanical and electrical setups complete, the system is ready for its first initialization sequence. First Power-On

The SpeedStile FL utilizes dry contact inputs for command validation. Locate the main I/O terminal strip on the Gunnebo logic controller:

Installation O peration and Maintenance Manual - Siel Invest

Connect a dedicated, normally closed (NC) dry contact loop from the building’s Fire Alarm Control Panel (FACP) to the emergency override terminals on the Gunnebo motherboard. gunnebo speedstile fl installation manual

Measure the distance between the cabinets at both the front and rear to guarantee they are perfectly parallel.

Proper site preparation is critical for the long-term stability and functionality of the SpeedStile units. : Concrete resistance : Minimum Bolting depth : Minimum 70mm. Foundation size : Minimum 2000mm x 500mm x 150mm deep.

Manually test the rotation of the wings to ensure smooth, unhindered movement. 4. Electrical Wiring and Connections

Before unboxing the equipment, a thorough site survey must be conducted to ensure the installation environment meets structural, electrical, and spatial requirements. Spatial and Clearance Requirements depending on run length), rated for 230V AC

Are you installing the , extended (FLs) , or wide (FLw) lane model? Share public link

Remember: A correct installation ensures smooth functionality and increases the lifespan of every component .

Multi-core shielded signal cables (

The wings detect the resistance or sensor blockage, instantly reverse to the open position, and trigger a warning log. Disconnect or open the FACP emergency override circuit. Locate the main I/O terminal strip on the

: The base area should be at least 1300mm to 2000mm long (depending on cabinet model) and 400mm to 500mm wide .

Prepare the floor cabling, ensuring access to a reliable power source and network cabling for access control integration.

When installing the Gunnebo SpeedStile FL, keep in mind: