Owon Hds2102s Firmware Update Link
Drag and drop the downloaded .bin firmware file directly into the root directory of the Owon drive. Do not put it inside any folders. Execute the Flash: Safely eject the USB drive from your operating system. Disconnect the USB cable.
: Extract your downloaded update package. Move the clean update file—typically named Scope.upp —directly into the root directory of the mounted removable drive.
: Battery-powered with a high-resolution color display, making it suitable for field work and bench testing. current firmware version
However, users have noted that while this page lists a specific firmware version ( v1.5.1 ), you should exercise extreme caution before downloading.
(Note: Owon changes their server structure occasionally. As of October 2023, this is active.) owon hds2102s firmware update link
Click the "Start Upgrade" button in the PC software and wait for the process to hit 100%. Troubleshooting & Post-Update Checklist Common Issues
: Power the oscilloscope back on. The hardware will automatically parse the root drive, flash the update block, and turn itself off once finalized. Turn the unit back on and revisit the system page to confirm your version number has updated. Why Update? Notable Fixes
Press the Utility button on your device, navigate to System , and select About . Note down your current version prefix (e.g., v1.1.2 or v2.0.1).
Unzip your downloaded firmware package. Locate the binary update file, which is typically named . Drag and drop Scope.upp directly into the root folder of the mounted removable drive. Step 4: Finalize the Flashing Drag and drop the downloaded
Let the device run its internal voltage routines for 2–3 minutes to ensure accurate measurements under the new firmware algorithms.
This comprehensive guide provides the official download links, preparation steps, and a risk-free installation walkthrough. Official Owon HDS2102S Firmware Download Links
: Community reports mention versions such as v1.5.1 , v4.7.1 , and even v4.9.0 for newer hardware revisions. Update Instructions
Press Utility > USB Device > Mass Storage (U-Disk). The device will appear on your PC like a standard flash drive. Disconnect the USB cable
Follow these general steps carefully to perform the update. Keep in mind that the exact menu names might vary slightly between different firmware versions:
Run the firmware upgrade software as an Administrator.
Unzip the downloaded folder on your Windows PC.
The HDS2102S is a "3-in-1" handheld device combining an oscilloscope, multimeter, and waveform generator. Oscilloscope : 100MHz bandwidth, 2 channels, and a 500MSa/s sample rate. Multimeter