Unraid Reset Network Settings
Connect a directly to your Unraid server. Reboot or power on the server.
If you cannot access the Unraid terminal, use a desktop or laptop to modify the flash drive manually: your Unraid server.
Once you are back in the web UI (using the DHCP-assigned IP), go to .
Locate the file named . This file contains your IP settings, bonding rules, and bridging configurations. unraid reset network settings
If you have a monitor plugged into the server, the command line login screen explicitly displays the current IPv4 address right above the login prompt.
Avoid pulling the power plug unless the server is completely frozen, as this can cause parity errors or data corruption. Step 2: Remove and Mount the USB Flash Drive Unplug the USB flash drive from your Unraid server.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Connect a directly to your Unraid server
If you can still access the command line through SSH or a physical monitor and keyboard, run the following commands: Remove the configuration files rm /boot/config/network.cfg rm /boot/config/network-rules.cfg (if it exists) Reboot the server Method 2: Manual USB Flash Drive Edit
Network resets are rarely performed casually; they are a troubleshooting step of last resort. Common scenarios include:
Restart your server to ensure all network services bind cleanly to the new configuration. Method 3: The WireGuard / VPN Lockout Fix Once you are back in the web UI
If a monitor is plugged into the server, the new IP address will be printed directly on the login prompt screen once the boot sequence finishes.
network.cfg (and network-rules.cfg if it exists). Alternatively, you can rename them to network.cfg.old if you want a backup. Step 4: Reboot Your Unraid Server Safely eject the USB flash drive from your computer.
Tip: Renaming them to network.cfg.old is safer if you want to reference your old settings later.