Hi Sharp Dvr Reset Password Fix Jun 2026

Alternatively, you can contact Hi Sharp support directly at to request a temporary reset code. 2. Check Default Credentials

Leave the battery out to fully drain the backup capacitors.

currently showing on the monitor grid

Find the silver, coin-shaped CR2032 battery on the motherboard.

Before attempting any complex procedure, test the most common Hi Sharp default credentials. Many Hi Sharp DVRs ship with one of these combinations: hi sharp dvr reset password fix

Do you see a or a QR code on your login window?

Look for a silver, coin-shaped CR2032 battery sitting in a slot on the motherboard.

Before you panic or consider replacing the DVR, try the methods below.

The menu method requires being logged in. If you cannot get past the login screen, use one of the hardware or support methods described earlier. Alternatively, you can contact Hi Sharp support directly

: Enable Network Time Protocol (NTP) in the network settings so the DVR clock automatically updates and stays accurate via the internet.

If the default passwords fail, draining the internal power forces the DVR clock to reset. This allows you to use a date-calculated super password.

If you cannot use the software method, you may need to perform a physical reset.

If you have recently factory reset the device or it is brand new, try the standard factory defaults: (case sensitive) , or leave it www.hisharp.com 3. Hardware Factory Reset currently showing on the monitor grid Find the

Here is the complete step-by-step guide to fixing a Hi Sharp DVR password lockout. Method 1: Try the Factory Default Passwords

Gently press the metal retaining clip to pop the coin battery out of its housing slot.

This method clears volatile memory by removing the motherboard's coin-cell battery, effectively resetting the password alongside other stored settings.

Many Hi Sharp DVRs leave the factory with standard passwords. Try these combinations first:

Email the code, along with your region, model number, and serial number, to sales@hisharp.com.tw or contact your local distributor to receive a temporary reset password. 3. Hardware Factory Reset