On 12V/2A (trickle charge), it safely charged a motorcycle battery overnight. On 10A, it revived a deeply discharged car battery in about 4-5 hours. The 30A setting gets hot and is best for short bursts.
: Features a battery reconditioning cycle and a boost mode for severely discharged batteries .
Plug the charger into a standard 120V outlet only after the clamps are securely attached.
Note: EverStart no longer maintains a dedicated manual archive, so avoid fake "driver download" sites. everstart battery charger 60108m manual
: Provides temporary high current to help start vehicles with low batteries. Recondition Mode
: Position the charger as far away from the battery as the DC cables permit. Never place the charger directly above the battery, as venting gases will cause corrosion.
Always operate the charger in a well-ventilated area. On 12V/2A (trickle charge), it safely charged a
6-Volt and 12-Volt lead-acid batteries.
The EverStart 60108M is a 12V smart digital charger featuring 2A, 10A, and 25A rates, alongside an automatic reconditioning mode for battery revival. Key operation involves connecting clamps to the battery, selecting settings, and using the automatic maintenance mode for safe charging. View a detailed walkthrough at
If you need to jump-start your vehicle immediately, use the 100A setting. Follow these specific timing rules to prevent overheating the charger's internal components: Connect the clamps and plug in the unit as detailed above. Flip the switch to . Crank the engine for no more than 3 to 5 seconds . : Features a battery reconditioning cycle and a
: Press the toggle button to select Standard , AGM , or Gel to match your battery type.
: Select 2A Trickle (best for long-term maintenance or small batteries), 10A Quick (standard charge), or 25A Rapid (fast recovery). Step 5: Monitor and Disconnect
Connect the clamp to the positive battery post.
The EverStart 60108M is a versatile tool designed for 12-volt battery systems. It features a straightforward control panel with three primary operational modes:
Eliminate extension cords; allow device to cool down before restarting. Battery is severely discharged or has a shorted cell