Wedo Paket 50 User Manual [iPad]

: Never drop packages onto the scale platform forcefully from a height. Sudden impacts create transient kinetic force spikes that exceed 50 kg, warping the internal metal load cells permanently.

: Remove the large parcel from the platform. The measured weight stays locked on the screen, allowing you to easily read and log the data.

Enables counting of equal-weight parts using reference quantities of 25, 50, 75, or 100 pieces.

Place the exact required weight onto the center of the platform.

Remove the weight and restart the scale. Calibration is now complete. 5. Maintenance and Troubleshooting Error Codes and Meanings wedo paket 50 user manual

button. The scale will automatically perform a null setting (zeroing). Core Functions Tare (Zeroing)

If you have a large box that blocks your view of the display while on the platform, the Hold function solves this problem.

From the official :

: Instructions on how to install the WeDo software, which typically involves downloading it from the LEGO Education website or installing it from a CD provided with the kit. : Never drop packages onto the scale platform

Check supply voltage and total load. The unit draws approx. 150mA plus 10mA per active relay. Overheating may also trigger shutdown – ensure 1 inch clearance above/below the DIN rail.

The Tare function allows you to weigh items inside a container without including the weight of the container itself. Place the empty box, bin, or pallet on the platform. Press the button once. The display will reset to 0.00 .

Verify jumper position (voltage vs. current). Also check that the common ground (GND) is shared between the sensor and the Paket 50.

Press to pause. Press START to resume.

: The terminal housing and internal components are not waterproof. Never submerge the scale or spray cleaning solutions directly onto the buttons. Wipe clean using a damp microfiber cloth with a drop of mild dish detergent.

Remote digital readout that can be freestanding or wall-mounted, ensuring large boxes don't block the view.

Connect the WEDO 9V mains adapter or insert a 9V battery. Press the power button to initialize.