Galaxy Aqua Premier Installation Manual //top\\ 🔔

Ensure the connection is tight, but avoid over-tightening as this can damage the plastic manifold. 4. Electrical Installation

From underneath the sink, slide on the plastic washer and the star lock washer, then thread on the locking nut.

Tighten the screws evenly on both sides until the clamp fits snugly around the pipe. Step 3: Mount the Faucet

Secure the bracket to the wall. If mounting to drywall, use heavy-duty wall anchors. For wood studs, drive the mounting screws directly into the wood. 3. Assembling the Ports

Use a 15mm compression fitting to connect the cold water supply to the shower's inlet manifold. galaxy aqua premier installation manual

A ceiling-mounted 45A double-pole pull-cord switch with a neon indicator light, or a wall-mounted switch located outside the showering area.

Attach the 3-way connector valve to the cold water supply line using Teflon tape to prevent leaks.

The Galaxy Aqua Premier offers flexible entry points (top, bottom, or rear).

The Galaxy Aqua Premier typically features clear INLET and OUTLET ports. Ensure the connection is tight, but avoid over-tightening

Every 12 months. Final taste enhancement right before water exits the faucet.

This guide aims to provide the information you need to maintain and troubleshoot your unit safely. For all installation and repair work, always rely on a qualified professional.

: This 9.5kW unit must be permanently wired to a dedicated supply from your consumer unit. double pole linked switch with at least a 3mm contact gap. Ensure the appliance is properly 3 wall-fixing positions

Plug the purifier's power cord into the electrical outlet and turn the switch . Tighten the screws evenly on both sides until

Complete Installation Guide for the Galaxy Aqua Premier Water Filtration System

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Use the mounting template or measure the distance between the slots on the back of the purifier.